top of page

MicroLED displays: the technologies, companies and people bringing them to market

MicroLED displays use arrays of microscopic inorganic LEDs, often smaller than 10 micrometres, as self-emitting pixels. They promise very high brightness, efficiency, contrast and lifetime, from smartwatches and AR glasses to TVs, automotive and transparent displays. Getting there means solving epitaxy and chip yield, mass transfer, colour conversion, backplanes, repair and cost.

TechBlick runs MicroLED Connect, the conference and exhibition of the microLED industry in Eindhoven, with online events in between. This page brings together every talk, highlight video, speaker, exhibitor, event and article on microLEDs.

On TechBlick: 367 talks, 944 highlight videos and clips, 268 speakers, 230 companies and institutes, 95 exhibitors, 17 events and 80 articles on microled.

Applications of microled

  • AR and smart glasses
  • Smartwatches and wearables
  • Large-area and TV displays
  • Automotive displays
  • Transparent displays
  • Optical communication

Upcoming microled events

Talks on microled

  • QD color conversion in MicroLED – a material perspective. Manuel Gensler, Chemical Physicist and Physical Chemist | Research Manager, Fraunhofer IAP. MicroLEDs, AR/VR Displays, Micro Optics 2025: Innovations, Start Ups, Market Trends (2025-03). Quantum Dot (QD) materials are emerging as promising candidates for color conversion in MicroLED displays, offering significant advantages over traditional RGB emitting backplanes. The Fraunhofer IAP has developed except…
  • Manufacturing Scalability of MicroLED Displays using UV-pumped Cd-free Quantum Dots. Nag Patibandla, Vice President, Applied Materials. Micro-LED & QD SEP 2024 (2024-09). Polychrome microLED displays of high brightness (one million nits), high resolution (>3000ppi) on CMOS backplanes are showing potential for millimeters size, near-eye display applications. As a step towards developing…
  • A novel bottom-up approach for InGaN/GaN based pyramidal micro-LEDs. Oskar Fajerson, CEO, Polar Light Technologies AB. Printed Electronics Innovation Day 2024 (2024-12). New 3D uLED-structures based on a novel bottom-up approach based on InGaN/GaN pyramidal quantum well structures. The pyramidal uLEDs are fabricated by means of a re-growth process on lithographically patterned SiN-masked…
  • Recent Advances in III-Nitrides for High Efficiency 1 to 10 micron scale MicroLED Devices. Steven DenBaars, Professor & Co-Director, UC Santa Barbara. Micro-LED & QD SEP 2024 (2024-09). The developments of high performance InGaN based RGB micro-light-emitting diodes (µLEDs) are discussed. Through novel epitaxial growth and processing, and transparent packaging we have achieved external quantum efficienc…
  • Defect-free AlGaInP micro-LEDs by wet chemical etching. Mike Yoo, CEO, Verticle Inc. MicroLEDs, AR/VR Displays, Micro Optics 2025: Innovations, Start Ups, Market Trends (2025-03). Micro-LED is known as the best display technology for the next generation displays, however real commercialization has been repeatedly delayed due to lack of advanced process technologies. Besides the mass transfer, RGB …
  • Full-Color Micro-LED Near-Eye Display Technology Based on Quantum Dot. Chen Chen, Co-Founder and CEO, Saphlux. Micro-LED & QD SEP 2024 (2024-09). In the category of near-eye displays used in AR/XR devices, the Micro-LED technology pathway is widely regarded as the ultimate display solution due to its advantages such as high efficiency, brightness, and energy savin…
  • A breakthrough in industrial microLED in laser mass transfer. Ralph Aschenbach, Coherent Corp. MicroLED Connect 2025 (2025-09). For several years mass transfer of microLED’s has been named as one of the most challenging process steps in microLED display manufacturing. Throughput, yield, flexibility, and small microLED handling must significantly …
  • MicroLEDs with built-in directive emission and RGB capability for power efficient AR microdisplays. Ivan-Christophe Robin, Head of Innovation, Aledia. MicroLED and AR/VR Display Innovation Day 2025 (2025-12). A new kind of microLEDs’ array technology that aims to answer ultrahigh brightness, narrow optical aperture, low power consumption and small footprint requirements for Augmented Reality glasses applications will be discu…
  • Mass Transfer Process for Mass production of MicroLED. Katsumi Araki, Account Manager, Toray Engineering. Micro-LED & QD SEP 2024 (2024-09). There are three main types of mass transfer technology in Micro LED. 1) Pick & Place method, 2) Laser Galvano scanning, 3) Line laser scanning. Each method has its advantages and challenges, and I will give the current s…
  • Addressing Manufacturing Challenges in MicroLED Microdisplays for Augmented Reality. Zahir Alpaslan, Strategic Product & Engineering Leader, GlobalFoundries. Micro-LED & QD SEP 2024 (2024-09). MicroLED technology holds immense promise for augmented reality (AR) displays, but its widespread adoption still faces manufacturing challenges. This presentation will discuss proposed solutions to fabrication of MicroLE…
  • A Bottom-Up InGaN Technology for Ultra-High Brightness MicroLED Displays. Mikael Björk, CEO, Hexagem. MicroLED Connect 2025 (2025-09). We present a bottom-up technology for producing dislocation-free, strain-relaxed InGaN microLEDs in the form of sub-micron scale hexagonal platelets. The use of InGaN barrier material enables high Indium-contents quantum…
  • A new kind of microLEDs with built-in directive emission and RGB capability for power efficient AR microdisplays. Xavier HUGON, COO, Aledia. MicroLED Connect 2025 (2025-09). A new kind of microLEDs’ array technology is described and discussed that aims to answer ultrahigh brightness, narrow optical aperture, low power consumption and small footprint requirements for Augmented Reality glasses…
  • MicroLED End-to-End Process Control. John C. Robinson, Ph.D., Sr Principal Scientist, KLA Corporation. Quantum Dots 2023: Material Innovations and Commercial Applications (2023-11). MicroLED displays offer many key performance benefits such as brightness, contrast, power consumption and lifetime, however, cost and manufacturing maturity remain barriers to wide market acceptance. Improved yield throu…
  • Total Solutions for Mass Production of Micro LED Display. Katsumi Araki, Account Manager / Technical Sales Representative, Toray Engineering. Quantum Dots 2023: Material Innovations and Commercial Applications (2023-11). Toray Engineering has developed series of technologies to manufacture micro-LED displays based on technologies cultivated through its manufacturing equipment of LCD displays and semiconductors. By combining these technol…
  • Pyramidal microLEDs in the same material system paving the way for RGB emission in micro displays. Chih-Wei Hsu, General Partner, Polar Light Technologies. MicroLED Connect 2025 (2025-09). Polar Light Technologies (PLT) has developed a novel microLED solution to generate RGB emission within a single material system. This is achieved by direct growth of hexagonal GaN pyramids with InGaN quantum wells (QWs) …
  • Micro-LED Displays in a Monolithic GaN System. Matthew Hartensveld, CTO, Innovation Semiconductor. Quantum Dots 2023: Material Innovations and Commercial Applications (2023-11). Despite the promising features of GaN-based micro-LED displays, their application has been impeded due to complexities in incorporating transistor logic and crafting multi-color emissions. Our research presents a compreh…
  • Addressing the Visual Inspection Challenges of microLED Displays & Lighting in Vehicles. Andrew Munro, Radiant Vision Systems. MicroLED and AR/VR Display Innovation Day 2025 (2025-12). MicroLED displays are poised to revolutionize the automotive industry, delivering improved performance. As production techniques improve and costs decrease, microLED technology will become more pervasive in Head-Up Displ…
  • High yield electrical connections to micro-LEDs via the chip-first OTFT backplane process. Simon Ogier, Smartkem. MicroLED Connect 2025 (2025-09). Fabrication of micro-LED displays with high yield and a minimal requirement for re-work is an important pre-condition for successful commercialisation of the technology. Economic production of micro-LED displays also req…
  • Enabling Full-Color μLED Displays: Giant Shell Quantum Dots as Stable and Efficient Color Converters. Sören Becker, Fraunhofer IAP. Festival-July2026 (2026-07). One of the central challenges in μLED display technology is achieving full-color emission. While blue μLEDs can be fabricated with high efficiency, equally efficient green and red μLEDs remain difficult. A promising solu…
  • Smart glasses displays: transitioning from LCoS to microLED and beyond.. Bernard Kress, Director, Google AR, Google. Micro-LED & QD SEP 2024 (2024-09). The fate of LCoS micro display panels for AR devices seems to be re-written every year, its demise being push further away by every new smart glass release. A decade ago, with the first microLED start-ups acquisitions by…
  • Fundamental Challenges in Micro LED Display Technology. Khaled Ahmed, Senior Principal Engineer, Intel. Displays & Lighting 2021: Innovations & Market Trends (2021-07). Manufacturing cost is the highest risk for µLED displays. µLED display cost is composed of backplane and frontplane costs. Backplane cost may be similar to OLED displays. The major cost contributors for frontplane are ep…
  • EHD in MicroLEDs: From Repair to Color Conversion. Patrick Galliker, CEO / Co-founder, Scrona. Micro-LED & QD SEP 2024 (2024-09). Inkjet printing of has become a manufacturing standard for obtaining high-end QD-enhanced OLED displays. To extend the viability of this approach towards microLED manufacturing, the conventional inkjet process is too lim…
  • What is EL Inspection and Why is it the Key Enabler for microLED Displays?. Noam Shapiro, VP Communications, InZiv. Printed Electronics Innovation Day 2024 (2024-12). Every day there is more news about microLED manufacturers planning to scale up their microLED production. What will it take to get the industry over the hump, and past the pilot line phase to widespread mass production? …
  • Quantum-Dot High PPI MicroLED Microdisplays for AR. Grace Lee, VP of Display Product Management, Mojo. Quantum Dots 2023: Material Innovations and Commercial Applications (2023-11). The display is the cornerstone of immersive and interactive augmented reality (AR) experiences. In this presentation, we will introduce Mojo Vision's revolutionary uLED full-color display technology for AR, featuring hig…
  • Chip-first active-matrix micro LED displays using low temperature OTFT backplanes. Simon Ogier, CTO, SmartKem. Quantum Dots 2023: Material Innovations and Commercial Applications (2023-11). Micro-LED technology provides a route to high brightness, high contrast, low power consumption displays with a superior lifetime to OLED. Deposition and patterning of the LEDs is performed separately from the active-matr…
  • New Color Conversion Solution for Ultra-fine Pixel-pitch, High-brightness MicroLEDs Displays. François Templier, Program Manager, CEA-Leti. Printed Electronics Innovation Day 2024 (2024-12). Inorganic Halide Perovskite Thin-films are evaluated as color-conversion layers (CCL) for MicroLED displays. Green and Red-emitting, thin-film CCL exhibit very narrow emission band, opening the possibility to covering 90…
  • XG-Alpha: Exploring Cost-Effective, High-Quality Laser Assembly of MicroLEDs. Jasper Wesselingh, Senior Principal Mechatronics Architect, ITEC B.V.. MicroLED and AR/VR Display Innovation Day 2025 (2025-12). High-yield and cost-effective microLED assembly processes still face major challenges to solve for successful market adoption by the display and lighting markets. We believe that achieving five-nine (or even six-nine) yi…
  • Pyramidal microLEDs in the same material system paving the way for RGB emission in micro displays. Ashutosh Kumar, Polar Light Technologies. Festival-July2026 (2026-07). MicroLED technology is a leading candidate for next-generation displays, particularly for augmented reality (AR) and high-resolution microdisplays. However, achieving high efficiency at micron-scale dimensions, scalable …
  • Driving nitride micro-LEDs with thin-film transistors built on solution processable Cu-In-Se ordered defect compound semiconductors. Qing Cao, Associate Professor of Materials Science and Engineering, University of Illinois. MicroLEDs, AR/VR Displays, Micro Optics 2025: Innovations, Start Ups, Market Trends (2025-03). The next-generation displays built on nitride-micro-LEDs aim to provide high brightness and resolution covering a large display area. They therefore require driving transistors in their active-matrix arrays capable of de…
  • Challenges in InGaN-Based Red Micro-LEDs Technology. Daisuke Iida, Senior Research Scientist, Kaust. Micro-LED & QD SEP 2024 (2024-09). Micro-LEDs are promising for next-generation displays such as AR/VR. InGaN material can generate emissions in red, green, and blue. In the same material system, the LED devices can be stacked continuously, making it poss…
  • Quantum Dots, OLED, MiniLED, MicroLED NanoLED: technology landscape for next generations TVs. Eric Virey, Senior Industry Analyst, Yole Development. Displays & Lighting 2021: Innovations & Market Trends (2021-07). OLED was once thought to be a sure winner for the next generation of high-end TVs. However, LCD keeps improving and closing the performance gap. Quantum Dots, already widespread in high end TVs are spreading into mid-ran…
  • Driving Micro LED Innovation: Unlocking Versatile Applications. Steve Ho, Macroblock. MicroLEDs, AR/VR Displays, Micro Optics 2025: Innovations, Start Ups, Market Trends (2025-03). Micro LED technology is revolutionizing the display industry with its exceptional brightness, energy efficiency, and scalability. This presentation explores the Micro LED driver IC technologies behind Micro LED advanceme…
  • MicroLED in AR Systems: Bridging Technology and Market Needs. Assaf Levy-Beeri, CTO and Business development, Joya Team. MicroLEDs, AR/VR Displays, Micro Optics 2025: Innovations, Start Ups, Market Trends (2025-03). MicroLED technology has the potential to revolutionize augmented reality (AR) glasses by offering high-performance displays, but its success depends on aligning with the needs of AR developers and the markets they serve.…
  • Pyramidal µLEDs – a novel - bottom-up concept delivering focused light emission and a path to monolithic RGB. Lisa Rullik, Polar Light Technologies. Micro-LED & QD SEP 2024 (2024-09). Our novel bottom-up concept based on InGaN/GaN uLEDs offers solutions to several challenges that the uLED development is facing right now, namely miniaturization of the die without efficiency droop, sufficient small pitc…
  • Smart glass: transitions in light engines towards microLEDs. Bernard Kress, Google. MicroLED Connect 2025 (2025-09).
  • Automotive User Experience - Opportunities for MicroLED Displays. Kai Hohmann, Product Manager, Continental. Micro-LED & QD SEP 2024 (2024-09). MicroLED displays are poised to play a significant role in the future of the display market due to their advanced features, which may fill the gap of lack of luminance of incumbent technologies and market demand for ener…
  • AR’s Display Dilemma - LCoS v MicroLED. Edward Tang, CEO & Founder, Avegant. MicroLED Connect 2025 (2025-09). As AR glasses move closer to mainstream adoption, the choice of display technology becomes crucial. In this talk, we delve into the comparison between LCoS (Liquid Crystal on Silicon) and microLED light engines for AR ap…
  • Monolithic MicroLED Microdisplays for AR Applications. Wei Sin Tan, VP of Engineering, Jade Bird Display. MicroLED Connect 2025 (2025-09). The recent progress of microLED microdisplays at JBD is discussed. Full color projectors based on combining three 4.0um pitch monochromatic RGB panels with an X-cube are already in mass production and used in commerciall…
  • Emerging Trends in microLED Chip Architecture, Metrology, and Inspection. Noam Shapiro, VP Communications, Inziv. MicroLEDs 2024: Start Ups Showcase (2024-02). This talk will explore the wide diversity in new microLED chip designs, including variations in size and geometry of the LED chip and contact pads, wavelength, luminance, and other properties, and the implications for ac…
  • Efficiency, resolution, and gamut tradeoffs of varied microLED architectures. Danielle Chamberlin, CTO, NanoPattern Technologies. Quantum Dots 2023: Material Innovations and Commercial Applications (2023-11). MicroLED display technology is in a period of rapid technological development and different architectures are being evaluated to fit a wide range of market applications from microdisplays to video walls. In particular, c…
  • Enabling Cost-Effective MicroLED Integration for Near-Eye Devices: A Semiconductor System Perspective. Seung Kang, Senior Vice President, Adeia. Micro-LED & QD SEP 2024 (2024-09). Emerging MicroLED technology offers compelling potential for near-eye devices. However, the MicroLED supply chain currently lacks readiness for mass production due to significant manufacturability and cost challenges. Fo…
  • MicroLEDs from displays to interconnects – European display production & foundry service. Jan Gülink, CTO, QubeDot. Festival-July2026 (2026-07). MicroLEDs are moving beyond display headlines into a broader role. We at QubeDot engineer microLED light sources for displays made in Europe, optical interconnects and customer-specific photonic systems. This talk showca…
  • Monolithic Full-Color MicroLED Microdisplays Using Hybrid Stack Structures (HSS). Yi Liu, VP New Business Development, Hongshi Intelligence. MicroLED Connect 2026 (2026-09).
  • Optical efficiency of reflective waveguides for microLEDs. Yochay Danziger, CTO, Lumus. MicroLEDs, AR/VR Displays, Micro Optics 2025: Innovations, Start Ups, Market Trends (2025-03). High efficiency of near-eye-display optics is achieved by maximizing light coupling between its’ three main components: the image generator, the collimating optics, and the waveguide itself. Image generator based on micr…
  • An R&D study on feasibility of Massive parallel assembly for contacting Micro-LEDs. Charles-Alix Manier, Research & Development Engineer, Fraunhofer IZM. MicroLEDs, AR/VR Displays, Micro Optics 2025: Innovations, Start Ups, Market Trends (2025-03). The present work describes a method for the RGB handling and the electrical bonding of Micro-LED arranged onto a host substrate emulating a display. The assembly technology will be presented which relies on a three-step …
  • Advancing Micro-LED Manufacturing: Overcoming Mass Transfer Challenges and Cost Barriers with Continuous Roll-Transfer Printing.. Eleni Margariti, Postdoctoral Researcher at Institute of Photonics, University of Strathclyde, University of Strathclyde. Micro-LED & QD SEP 2024 (2024-09). The rapid advancement of Micro-LED technology has brought forth unprecedented opportunities, yet significant challenges remain in achieving scalable manufacturing processes. In this presentation, we delve into the critic…
  • Monolithic Red-Green-Blue emissions from InGaN nanopyramids for full color micro-display. Amélie Dussaigne, Senior Researcher, CEA-Leti. MicroLED Connect 2025 (2025-09). Full color micro-displays with a pixel pitch of below 10 µm are needed for augmented and virtual reality applications. In the native emission approach, high efficiency Red-Green-Blue (RGB) pixels could be achieved using …
  • Key Metrics for Mass Adoption: Defining the Future of MicroLED Production. Reza Chaji, Founder and CEO, VueReal. MicroLED Connect 2025 (2025-09). The path to widespread adoption of microLED technology hinges not just on innovation but on achieving critical manufacturing benchmarks. In this talk, we will explore the fundamental parameters that microLED production m…
  • MOCVD Approaches to High Volume MicroLED Manufacturing. Javier Banos, Marketing Director, Veeco Instruments. MicroLED Connect 2025 (2025-09). As the microLED industry continues to advance and develop new use cases, cost has become a key obstacle to profitable commercial deployment of its most promising applications. Multiple steps in the process flow for fabri…
  • Micro LED Full Wafer Inspection by using Photoluminescence. Kota Morishima, Engineer, Business Planning, Hamamatsu. Micro-LED & QD SEP 2024 (2024-09). In this presentation we will introduce our latest technology in micro-LED wafer inspection based on photoluminescence analysis. We are introducing our new imaging module mounted in our full wafer micro-LED inspection mac…
  • Can MicroLEDs Catch Up and Pass OLEDs?. Barry Young, Managing Director, OLED association. Quantum Dots 2023: Material Innovations and Commercial Applications (2023-11). In the mid-2000s, OLED panel makers entered the display space targeting the LCD monopoly. By 2022, OLEDs generated $42b of the $137b in display revenue and 50% of all the smartphone shipped. OLEDs targeted the high end o…
  • From Materials to OSAT: SITRAB Technology for Scalable Micro-LED Transfer and Bonding. Kwang-Seong Choi, Electronics and Telecommunications Research Institute. MicroLED Connect 2026 (2026-09). Micro-LED technology is widely regarded as a key enabler for next-generation displays and emerging photonic applications; however, its large-scale commercialization remains constrained by the complexity, cost, and yield …
  • Microled Microdisplay Metrology. Sascha Reinhardt, Instrument Systems. Festival-July2026 (2026-07). This talk provides an overview of metrology solutions for characterizing µLEDs and microdisplays, with an emphasis on high resolution 2D camera based measurement. It addresses a key practical challenge in microdisplay pr…
  • Adhesives for electrical and mechanical connection for mini- and microLEDs in fine pitch applications. Sven Hujo, Specialist Consumer Assembly, Delo. MicroLED Connect 2025 (2025-09). This presentation highlights the importance of reducing the weight of semiconductor assemblies to improve the efficiency of electric vehicles and the acceptance of wearables like smart glasses. The use of functional poly…
  • High resolution inkjet printing technology for QD color converter on Micro LED. Hidehiro Yoshida, General Manager, Panasonic Production Engineering Co.,Ltd.. MicroLED Connect 2025 (2025-09). This paper reports on the development of a specialized inkjet printing head and equipment for high resolution printing of QD dispersed inks. First, to achieve a robust process, we proposed an inkjet head design compatibl…
  • MicroLED & AR: An Ideal Match. Raphaël MERMET-LYAUDOZ, Technology and Market Analyst, Yole. Printed Electronics Innovation Day 2024 (2024-12). After experiencing a slowdown in 2022 and 2023, the augmented reality (AR) market is now poised for resurgence, fueled by compelling AI-driven use cases. At the same time, microLED displays are emerging as a superior sol…
  • Achieving Baseline Efficiency in Red microLEDs for AR/VR Applications. Caroline O'Brien, CEO, Kubos Semiconductors. Quantum Dots 2023: Material Innovations and Commercial Applications (2023-11). The explosion in interest in augmented reality (AR) and virtual reality (VR) applications amongst the big technology players in recent years has already triggered frantic development activity in the markets for the key e…
  • Unleashing microLED’s Future: The Power of Electroluminescence Testing. Noam Shapiro, InZiv. MicroLEDs, AR/VR Displays, Micro Optics 2025: Innovations, Start Ups, Market Trends (2025-03). Despite their promise, microLED displays have yet to achieve mass commercialization, with yield improvement being a critical hurdle. Effective testing is essential to overcoming this challenge. This talk will explore the…
  • Color measurement solutions for MicroLED displays. Peter Karp, Senior Sales & Support, Admesy. Printed Electronics Innovation Day 2024 (2024-12). This talk gives an overview of color measurement solutions for MicroLED displays. They are essential for ensuring accurate and consistent color reproduction.
  • Developments in High Efficiency Ultra-Small Micro-LEDs Based on III-Nitrides. Steven DenBaars, Professor & Co-Director, SSLEEC, UC Santa Barbara. Mini & Micro LED Displays 2022: Markets, Manufacturing Innovations, Applications, Promising Start ups (2022-11). The developments of high performance InGaN based RGB micro-light-emitting diodes (µLEDs) are discussed. Through novel epitaxial growth and processing, and transparent packaging we have achieved external quantum efficienc…

Companies and institutes

Fraunhofer IAP, VueReal, Polar Light Technologies AB, Smartkem, Coherent Corp, Holst Centre, Google, Hummink, QubeDot, QustomDot, Applied Materials, Delo, Instrument Systems, InZiv, XTPL, UC Santa Barbara, Toray Engineering, 3D Micromac, Adeia, QNA Technology, Aledia, Yole, CEA-Leti, Saphlux, SCIL Nanoimprint Solutions, Mikro Mesa, CEA, KGOnTech, TracXon, Nanosys, Notion Systems, Kubos Semiconductor, PlayNitride, GE Research, Meta, Finetech GmbH, Enjet, Omdia Display, Fraunhofer IZM, iBeam Materials, GlobalFoundries, KLA Corporation, STMicroelectronics, Intel, Scrona, DELO Industrial Adhesives, Continental, Sony, Panasonic Production Engineering Co.,Ltd., Lusovu, Komori America Corporation, ALLOS Semiconductors, Verticle Inc, Hexagem, Innovation Semiconductor, Terecircuits, Radiant Vision Systems, Printed Electronics Ltd, Mojo, Bühler Alzenau GmbH, ITEC B.V., NextFlex, University of Illinois, Kaust, Yole Development, Macroblock, Joya Team, ASML, Avegant, Jade Bird Display, NanoPattern Technologies, Sharp, Hongshi Intelligence, Lumus, Morphotonics, University of Strathclyde, Hendy Consulting, NS Nanotech, Veeco Instruments, Hamamatsu, OLED association, KIMOTO, Electronics and Telecommunications Research Institute, Panasonic, Kubos Semiconductors, Avery Dennison, Admesy, Helmholtz-Zentrum Berlin, Raysolve Optoelectronics, Eastman Kodak Company, Heraeus Electronics, TCL CSOT, Oxford Instruments Plasma Technology, Konica Minolta, TNO at Holst, NSC - New Silicon Corporation Pte Ltd, Lextar, Maradin Ltd, Alqio, CondAlign.

Exhibitors

  • Fraunhofer IPMS: Products & Services Fraunhofer IPMS is specialized in the development of OLED/LED microdisplays for AR and VR glasses, other wearables as well as for the use in
  • Fraunhofer IAP: We make materials fit for the future! Efficient. Intelligent. Sustainable. The Fraunhofer IAP specializes in researching and developing polymer applications. It
  • Instrument Systems: Founded in 1986, Instrument Systems has since grown into one of the world’s leading manufacturers of high-precision spectrometers, complex systems and software
  • Intlvac Thin Film: We have a long-standing commitment to quality and excellence in the high vacuum industry. Started in 1967, the company is a leader in manufacturing of high vacu
  • Morphotonics BV: We are an ambitious indirect spin-off company of Royal Philips, with more than 15 years of experience in nanoimprint and microreplication technology.
  • Nanoscribe: Additive manufacturing technology with nano precision, innovative and customized solutions for industry and research, worldwide sales and highly professional se
  • Nippon Sanso: The Nippon Sanso Holdings Group is the world's fourth-largest supplier of industrial, electronic, and medical gases, operating in four geographic hubs - Japan,
  • VueReal: VueReal is a world-class multidisciplinary research team covering everything from foundational research through production, with the business expertise to take
  • WEVE: WEVE’s measurement technology has been rigorously tested both in laboratory settings and diverse real-world research environments. Discover case studies, publis
  • Aledia: Aledia is revolutionizing the field of display screens by introducing LED technology to the world of microelectronics. Our microLED technology based on 3D and s
  • Saphlux: Saphlux started at Yale University in 2015. Building upon the proprietary GaN based inventions, our team has been dedicated to the development and commercializa
  • Hongshi Intelligent Technology: Yancheng Hongshi Intelligent Technology Co., Ltd. (hereinafter referred to as Hongshi Intelligent) was established in 2017. It focuses on the self-development o
  • ImageXpert: ImageXpert has been providing flexible machine-vision based measurement systems and world-class customer support since 1989...
  • SUSS MicroTec Solutions GmbH & Co. KG: The SUSS MicroTec Group is a leading supplier of equipment and process solutions for microstructuring applications with more than seventy years of engineering e
  • VIEWTRIX Technology Co., Ltd: VIEWTRIX Technology Co., Ltd. is an enterprise with display technology research and development as its core, specializing in the research and development, desig
  • ACI Materials: Experience the ACI Material Advantage ACI manufactures high-performance inks, pastes, and coatings using a revolutionary cavitation process coupled with decades
  • Agfa: Building on 100+ years of experience in chemistry and chemical formulations, Agfa is a globally recognized supplier of PEDOT:PSS materials for antistatic and ca
  • Coveme Spa: Polyester film is the heart of Coveme. We have a deep-rooted and unique knowledge thanks to 60 years of experience in transforming this extraordinary material.
  • Danish Technological Institute: DTI Printed Electronics – Your printed electronics one-stop-shop DTI is a leading research and technology Institute. We currently employ 1000+ specialists and w
  • DoMicro/FlexMicro: IMAGINE, CREATE, ACCOMPLISH - micro assembly technologies/application solutions DoMicro embarks upon business opportunities in the emerging field of flexible hy
  • Eastman Kodak Company: EKTAFLEX Functional Printing Solutions: Printed Electronics and Security With the slogan "you press the button, we do the rest," George Eastman put the first si
  • Holst Centre: Accelerating innovation for a resilient society At Holst Centre we develop, innovate and connect. We are an independent research and innovation centre, jointly
  • Hummink: Hummink has developed a new unique high precision capillary printing technology (HPCaP) of any material on any substrate at the micron and sub-micron scale. Hum
  • KIMOTO: Kimoto Group is a technology company developing advanced functional films for various industries such as: Electronics, Automotive, Lighting, Medical and compone
  • Nagase ChemteX America: Nagase ChemteX America LLC. (NCU) technology focuses on providing materials for Printed Electronics applications. Our products are thoroughly tested for compati
  • RK Siebdrucktechnik: Central to what is on offer is a comprehensive range of RKS systems and stabilized squeegee blades, squeegee - grinders, peripherals as well as special applicat
  • SunRay Scientific: Flexible Electronics Begin with Us Sunray Scientific offers custom engineered interconnect solutions for advanced electronic packaging. SunRay’s patented ZTACH®
  • AddOptics: Did you know that over 60% of people require prescription lenses? We've recognized that since every set of eyes is unique, so should AR lenses be. That's why we
  • Adeia
  • Ames Goldsmith Corporation: Originally founded in 1860 as Ames Chemical Company, the company was re-established as Ames Goldsmith Corporation in 1979. Ames Goldsmith’s plant has been in co
  • Brewer Science: Brewer Science is a global leader in developing and manufacturing next-generation materials and processes that foster the technology needed for tomorrow. Since
  • Brilliant Matters: Innovating for a brilliant future. Brilliant Matters was created by passionate material scientists to answer the need for a reliable supply of a new generation
  • Coherent LaserSystems: Coherent empowers market innovators to define the future through breakthrough technologies, from materials to systems. We deliver innovations that resonate with
  • Copprint: Copprint is an advanced materials chemical company focused on conductive Nano Copper inks for additive copper printing. Our rapid self-sintering Nano Copper Ink
  • DJK Europe GmbH: As an expanding sales and service company, our focus is on the provision of equipment and systems for industry, combined with excellent service and a well-devel
  • DR Laser Singapore Pte Ltd: DR Laser, founded in Wuhan in 2008, is a national intelligent photovoltaic pilot demonstration unit of the Ministry of Industry and Information Technology, an i
  • Hamamatsu Photonics: Infrared laser systems for efficient laser sintering of metallic Nano inks Hamamatsu Photonics is dedicated to improving life through photonic technologies. Bas
  • Henkel AG & Co. KGaA: INNOVATE WITHOUT THE HASSLE OF INNOVATING! Henkel Adhesive Technologies holds leading market positions worldwide in the industrial and consumer business. As a g
  • Joanneum Research: MATERIALS provides interdisciplinary approaches for the entire value chain from the initial concept to the prototype using cutting-edge technologies and process
  • Jupiter SR
  • Konica Minolta: Konica Minolta Sensing Europe B.V., part of the Industrial Business division of Konica Minolta, Inc. Japan, is a leading provider of measurement solutions for C
  • Oxford Instruments: Oxford Instruments plc is a leading provider of high technology products and services to the world's leading industrial companies and scientific research commun
  • Polar Light Technologies: Polar Light Technologies is the result of Professor Per-Olof Holtz and his research team’s long-time research within semiconductor and optoelectronics developme
  • Pollen Metrology: Smart3 by Pollen accelerates industrial performance in semiconductors, electronic displays, and fabless companies by combining data, domain expertise, and colla
  • Quad Industries: Quad Industries has been at the forefront of applied electronics for more than 25 years, which makes us a reliable partner in the development and manufacturing
  • QubeDot
  • Skylark Lasers: Laser manufacturer of spectrally pure, high performance CW single frequency DPSS lasers. Our single frequency laser systems are precision engineered under Class
  • TechnoTeam Bildverarbeitung: With over 30 years of experience, not only in the field of light and color measurement but also in the field of imaging technology, we develop high-quality prod
  • Toray Research Center: To celebrate our 40th anniversary, Toray Research Center established the mission slogan: “INNOVATION IN. EXCELLENCE UP.” and designed a corresponding logo. This
  • TracXon: TracXon B.V. is a foundry for Printed Electronics, spun off from Holst Centre/TNO in 2022. TracXon is based in Eindhoven in The Netherlands and is focused on "R
  • Veeco: Veeco is a leading innovator in semiconductor process equipment, offering advanced technologies such as laser annealing, ion beam deposition and etch, CVD, MOCV
  • Voltera: A prototyping platform for electronics On your desktop and on your schedule, the Voltera V-One PCB Printer gets you from prototype to production faster than eve
  • VTT: Beyond The Obvious VTT inspires exponential hope by creating systemic and technological breakthroughs that bring fundamental transformation and renewal. Our wor
  • XTPL: XTPL is a company developing globally innovative, additive manufacturing technology that enables ultra-precise dispensing of nanomaterials. Unique XTPL printing
  • Bühler Leybold Optics: Billions of people come into contact with Bühler technologies to cover their basic needs for food and mobility every day. For this, we develop the best process
  • COATEMA Coating Machinery: For more than 40 years the innovative equipment manufacturer from Germany provides flexible and efficient lab2fab solutions for coating, printing and laminating
  • CondAlign AS: Novel ACF for room temperature, low-pressure component bonding in flexible, hybrid and printed electronics. CondAlign brings a range of innovative, adhesive ani
  • DELO: DELO is a leading manufacturer of high-tech adhesives and other multifunctional materials as well as adhesive dispensing and curing technology. Its products are
  • ELANTAS Europe: Printing the future ELANTAS Europe is part of the ALTANA Group and a leading manufacturer of insulating and protective materials for the electrical and electron
  • Hoenle Adhesives: The Dr. Hönle AG is one of the leading suppliers of industrial UV technologies worldwide. Together with our subsidiaries, we develop, produce and sell LED UV un

Articles

Past events

Frequently asked questions

What is a microLED display?

A display whose pixels are microscopic inorganic LEDs, typically below about 50 micrometres and often below 10, that emit light themselves, so no backlight or liquid crystal is needed.

What are the advantages of microLED?

Very high brightness and efficiency, deep blacks and high contrast, long lifetime, fast response and robustness, which suit AR glasses, wearables, automotive and large premium displays.

What are the main manufacturing challenges?

Making small, efficient LEDs, especially red, at high yield; transferring millions of chips accurately (mass transfer) or building monolithic arrays; colour conversion; inspection and repair; and bringing cost down.

Where does the microLED industry meet?

At TechBlick's MicroLED Connect conference and exhibition in Eindhoven, co-located with AR/VR Connect, and at TechBlick's online microLED and display events.

Related topics

CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page